Tag Archives: formats

Equivalence, Formats, IQ, Spatial Resolution

Are micro Four Thirds Lenses Typically Twice as ‘Sharp’ as Full Frame’s?

4 Comments

In fact the question is more generic than that.   Smaller format lens designers try to compensate for their imaging system geometric resolution penalty  (compared to a larger format when viewing final images at the same size) by designing ‘sharper’ lenses specifically for it, rather than recycling larger formats’ designs (feeling guilty APS-C?) – sometimes with excellent effect.   Are they succeeding?   I will use mFT only as an example here, but input is welcome for all formats, from phones to large format.

Continue reading Are micro Four Thirds Lenses Typically Twice as ‘Sharp’ as Full Frame’s? →

Equivalence, Formats, IQ, Sensors, Spatial Resolution

Equivalence in Pictures: Sharpness/Spatial Resolution

8 Comments

So, is it true that a Four Thirds lens needs to be about twice as ‘sharp’ as its Full Frame counterpart in order to be able to display an image of spatial resolution equivalent to the larger format’s?

It is, because of the simple geometry I will describe in this article.  In fact with a few provisos one can generalize and say that lenses from any smaller format need to be ‘sharper’ by the ratio of their sensor diagonals in order to produce the same linear resolution on same-sized final images.

This is one of the reasons why Ansel Adams shot 4×5 and 8×10 – and I would too, were it not for logistical and pecuniary concerns.

Continue reading Equivalence in Pictures: Sharpness/Spatial Resolution →

Equivalence, Formats, Sensors

Equivalence in Pictures: Focal Length, f-number, diffraction, DOF

Leave a comment

Equivalence – as we’ve discussed one of the fairest ways to compare the performance of two cameras of different physical formats, characteristics and specifications – essentially boils down to two simple realizations for digital photographers:

  1. metrics need to be expressed in units of picture height (or diagonal where the aspect ratio is significantly different) in order to easily compare performance with images displayed at the same size; and
  2. focal length changes proportionally to sensor size in order to capture identical scene content on a given sensor, all other things being equal.

The first realization should be intuitive (see next post).  The second one is the subject of this post: I will deal with it through a couple of geometrical diagrams.

Continue reading Equivalence in Pictures: Focal Length, f-number, diffraction, DOF →

Equivalence, Formats, Sensors

Focus Tolerance and Format Size

Leave a comment

The key variable as far as the tolerances required to position the lens for accurate focus are concerned (at least in a simplified ideal situation) is an appropriate approximate distance between the desired in-focus plane and the actual in-focus plane (which we are assuming is slightly out of focus). It is a distance in the direction perpendicular to the x-y plane normally used to describe position of the image on it, hence the designation delta z, or dz in this post.  The lens’ allowable focus tolerance is therefore  +/- dz, which we will show in this post to vary as the square of the format’s diagonal. Continue reading Focus Tolerance and Format Size →