Tag Archives: photon noise

Photons, Shot Noise and Poisson Processes

Every digital photographer soon discovers that there are three main sources of visible random noise that affect pictures taken in normal conditions: Shot, pixel response non-uniformities (PRNU) and Read noise.[1]

Shot noise (sometimes referred to as Photon Shot Noise or Photon Noise) we learn is ‘inherent in light’; PRNU is per pixel gain variation proportional to light, mainly affecting the brighter portions of our pictures; Read Noise is instead independent of light, introduced by the electronics and visible in the darker shadows.  You can read in this earlier post a little more detail on how they interact.

Read Noise Shot Photon PRNU Photo Resonse Non Uniformity

However, shot noise is omnipresent and arguably the dominant source of visible noise in typical captures.  This article’s objective is to  dig deeper into the sources of Shot Noise that we see in our photographs: is it really ‘inherent in the incoming light’?  What about if the incoming light went through clouds or was reflected by some object at the scene?  And what happens to the character of the noise as light goes through the lens and is turned into photoelectrons by a pixel’s photodiode?

Fish, dear reader, fish and more fish.

Continue reading Photons, Shot Noise and Poisson Processes

Sub LSB Quantization

This article is a little esoteric so one may want to skip it unless one is interested in the underlying mechanisms that cause quantization error as photographic signal and noise approach the darkest levels of acceptable dynamic range in our digital cameras: one least significant bit in the raw data.  We will use our simplified camera model and deal with Poissonian Signal and Gaussian Read Noise separately – then attempt to bring them together.

Continue reading Sub LSB Quantization

Sensor IQ’s Simple Model

Imperfections in an imaging system’s capture process manifest themselves in the form of deviations from the expected signal.  We call these imperfections ‘noise’ because they introduce grain and artifacts in our images.   The fewer the imperfections, the lower the noise, the higher the image quality.

However, because the Human Visual System is adaptive within its working range, it’s not the absolute amount of noise that matters to perceived Image Quality (IQ) as much as the amount of noise relative to the signal – represented for instance by the Signal to Noise Ratio (SNR). That’s why to characterize the performance of a sensor in addition to signal and noise we also need to determine its sensitivity and the maximum signal it can detect.

In this series of articles I will describe how to use the Photon Transfer method and a spreadsheet to determine basic IQ performance metrics of a digital camera sensor.  It is pretty easy if we keep in mind the simple model of how light information is converted into raw data by digital cameras:

Sensor photons to DN A
Figure 1.

Continue reading Sensor IQ’s Simple Model

SNR Curves and IQ in Digital Cameras

In photography the higher the ratio of Signal to Noise, the less grainy the final image normally looks.  The Signal-to-Noise-ratio SNR is therefore a key component of Image Quality.  Let’s take a closer look at it. Continue reading SNR Curves and IQ in Digital Cameras